Formaldehyde Detection Instrument Professional Household High-Precision Temperature and Humidity CO2 O2 Tvoc Pm2.5 Pm10 Indoor Air Quality Detector

Product Description

Product Introduction:
The product can be tested for PM2.5, PM10, VOC, formaldehyde, temperature, humidity, CO2, O2, etc., and can also be customized according to customer requirements. The device is not only compact and has high detection accuracy, but also a good means of detecting air quality in homes and offices. The device is powered by rechargeable batteries and does not require battery replacement.
matters needing attention
This product is a six in one handheld indoor air quality detector that can detect PM2.5, PM10, formaldehyde, TVOC, temperature, and humidity parameters. To ensure better safety and effectiveness of the instrument during use, please pay attention to the following:
To ensure that you can operate the instrument normally, please read the instrument manual carefully before use.
2. New equipment must undergo a power on test for at least 1 hour before normal formaldehyde and toxic gas detection can be performed
3. Before detecting formaldehyde and VOC every time, please be sure to calibrate in a ventilated place with fresh air quality. During detection, avoid chemical pollutants such as spices, perfume, toilet water, paint, air freshener, cigarettes, alcohol, etc. to avoid damaging the sensor..
4. Do not block the ventilation holes of the sensor, as this will affect the normal operation of the product.
5. The sensors and chips used in this product belong to high-precision products. Please avoid high temperature or flammable gas or liquid environments to prevent interference or damage to precision components.
When the product is damaged, it must be inspected and repaired by professional personnel.
7. Children and toddlers are strictly prohibited from playing with the product and accessories to prevent them from disassembling and swallowing the parts.
8. The product has a built-in rechargeable lithium battery, please do not work in high temperature environments.
 

Supply voltage:	5V
Battery capacity:	2000mAH
Charging method:	USB
Average current:	120mA
Measurement parameters:	PM2.5, PM10, VOC, formaldehyde, temperature, humidity, air quality index.
Working temperature:	0-40 ºC
Working humidity:	20% RH~80RH%
Response time:	<3S
Measurement range:	PM2.5:0-1000ug/m3  PM10:0-2000ug/m3  CH2O:0-1.999mg/m3   VOC:0-9.999mg/m3
Measurement resolution:	PM2.5:1ug/m3   PM10:1ug/m3 CH2O:0.001mg/m3  VOC:0.001mg/m3
Measurement accuracy:	3%
Product weight:	200g
Product size:	160 * 70 * 50mm

 

Product Description

Factory strength

Applicable scenarios

 

Product Parameters